This video is bound to be a focus for Detailers across the world! It’s time to lastly debunk the age-old query of which type of polisher cuts the FASTEST! What will burn via the Clear Coat first? Dual Action Orbital? Rotary? Forced Action? Let’s discover out!
It’s very uncommon that you just get the chance to get THREE detailers to run THREE machines on ONE hood. The thought behind the video is easy, discover out which machine will reduce the quickest whereas eliminating as many variables as doable. The Dual Action, Rotary, and Forced-Action have been all geared up with the SAME pad, SAME compound, and calculated to run on the SAME pace. This video was made to point out simply how lengthy it takes to really injury paint. You must keep in the identical spot for a number of minutes to even make a dent within the coating with the type of pad and compound we used. Hopefully this proves that sprucing isn’t as scary because it seems to be.
The Hood you see was pulled from the junkyard after extensively measuring the paint thickness to guarantee that the start line was as shut as doable for all 3 machines. The taped off areas have been measured to be as shut to one another in thickness as doable. The guidelines have been easy, run the machines for a time frame and measure the depth of the paint and warmth between periods. Pads have been all cleaned on the similar time to create an equal taking part in subject. What occurred in the long run was what we LEAST anticipated.
What did you suppose would reduce via the quickest? Dual Action vs. Rotary vs. Forced Action. Let us know within the feedback!
TRC Premium Pearl Towel:
The Last Cut (TLC) Compound:
Paint Depth Gauge (Affiliate hyperlink):
Rupes Rotary (Affiliate hyperlink):
Flex 3401(Affiliate hyperlink):
RATE & REVIEW:
Hosts: Anthony Fisher, Levi Gates, Yvan Lacroix
Recorded by: Jimmy Wilkey, Dane Hennen
Edited by: Tim O’Brien
Content supplied courtesy of The Rag Company ©2020
Subscribe to Channel:
This video by The Rag Company was considered 248117 and appreciated: 2974 occasions
If you want this video, please support their channel by liking and subscribing.