Watch extra How to Clean Your Car videos:
Polycarbonate headlights turn into cloudy and scratched with age, creating a security hazard. Here’s how to polish them up like new.
Step 1: Wash and dry
Wash and dry your automobile to take away all traces of grime and grit. Then, place blue masking tape round your headlights to defend the encompassing physique and grill.
Step 2: Polish the floor
Thoroughly clear the headlight floor with the headlight polish and material, rubbing it in a round movement.
Each lens can take up to 10 minutes of sprucing earlier than you see a distinction, so be affected person.
Step 3: Sand
Soak the 1,000-grit sandpaper in chilly water for 10 minutes. Spray the headlights with water. Sand fastidiously in a single path, protecting the headlights moist as you’re employed.
Be cautious not to injury the paint or chrome. Replace masking tape that begins to peel.
Step 4: Wipe clear
Spray the headlights with window cleaner and wipe them with the rag.
Step 5: Repeat
Repeat the process with the 1,500- and a pair of,000- grit sandpaper. Soak the paper first and hold the headlights moist; then sand at a 90-degree angle to the earlier path you used. Always sand in a single path. Use the window cleaner and wipe the lights clear after every sanding.
Sand fastidiously to take away pits and scratches, and periodically dry the floor with a towel to be sure your sanding is even.
Step 6: Polish once more
Polish the lights with the sprucing compound as soon as extra.
Step 7: Remove the tape
Remove the tape and wipe the lights and surrounding space a last time.
Did You Know?
Automobile headlights within the early 1900s have been powered by acetylene gasoline.
Subscribe to Channel:
This video by Howcast was seen 263602 and favored: 302 occasions
If you want this video, please support their channel by liking and subscribing.